PayPal supports a large number of credit cards including Visa, MasterCard, American Express, Discover, JCB, Diner's Club and EnRoute. Check cards or Debit cards with either a Visa or MasterCard logo are supported and treated just like a credit card.
to see which Credit & Debit Cards are accepted by PayPal
Please wait for this page to load, it may take some time. When fully downloaded the words in red will disappear
Please check your order details on the right side, if OK add it to your Cart.
If not your order details can be changed on the relevant Tabs on the left side.
Additional Notes
Add to Cart
Your Order Specification
×
Info and options for Kinman Converge-3 splitting controls
Noiseless split single coil option
Firstly, our splitting control includes our pre-set Jangle control which operates on the humbucker sound. This option is not available on the non-noiseless split single coil version.
Secondly, the inclusion of our special splitting control is mandatory because the circuitry is complex and is designed into the attached Printed Circuit Board.
Thirdly, our rotary control with it’s Push/Push switch can be configured as a Volume control or as a Tone control that operates on the associated pickup. Select the option in the order form.
Finally, if you prefer, the splitting control can be a mini-toggle switch with Gold plated contacts which avoid switching noise. Bushing diameter is 6mm but we supply ours with an adaptor bezel for mounting into a 3/8” (9.5mm) hole which is the diameter of American controls.
Non-noiseless split single coil option
Firstly, there is no pre-set Humbucker Jangle control with this option.
Secondly, the inclusion of our special splitting control is mandatory because the circuitry is complex and is designed into the attached Printed Circuit Board.
Thirdly, our rotary control with it’s Push/Push switch can be configured as a Volume control or as a Tone control that operates on the associated pickup. Select the option in the order form.
Finally, if you prefer, the splitting control can be a mini-toggle switch with Gold plated contacts which avoid switching noise. Bushing diameter is 6mm but we supply ours with an adaptor bezel for mounting into a 3/8” (9.5mm) hole which is the diameter of American controls.
×
Sorry our Goodbye Soldering Harness for Stratocaster will not install into G&L brand guitars because the switch slot is in a different position compared to Fender. Go back to the Harness Tab where NONE (no harness) has been indicated. and resume your order.
×
×
Sorry our Goodbye Soldering Harness for Stratocaster will not install into G&L brand guitars because the switch slot is in a different position compared to Fender. Go back to the Harness Tab where NONE (no harness) has been indicated. and resume your order.
