Home > Products > Guitar > Stratocaster




Base Price :

$125 USD

No ORDER Form on this site. Please place your order on the mobile site :





Hx-85 v2 New version is louder, spankier and clearer


 

 

Hx-85 in an Ivory White cover

This is the bridge pickup in the Woodstock Plus set.  AVn-69 are the middle and neck pickups.

October-2019:  The Hx-85 has been upgraded to v2, that is some of our Gen-2 technology has been incorporated to significantly increase loudness and improve the snap of attack.  The sound is also more open and detailed.

You will get Zero-Hum, longer sustain, minimized fret buzz and a loud n thicker sound that is great for the bridge position. 

This pickup was designed especially for the bridge position of the Woodstock Plus set for those who like a hotter bridge pickup for easy overloading/distortion.  It has a fatter, thicker sound on the wound strings and has the third hottest output of all Kinman Strat* replacement pickups.  Only the Big-Nine-0 and Kick-in-the-Arse are louder.  It delivers smooth and creamy distortion, either natural overdrive or through FX without loosing it's edge.

The Hx-85 works well in the neck and middle positions too where it produces a nice thwack attack at clean volume.

News flash Apr-2021: Now with our new Synergy baseplate that allows switching off Hum Cancelling as well as switching to 'Synergy' mode for those that think hum is part of Fender sound.

Signal chain requirementsAny old cable won't doAs with any pickup it's a good idea to use a low capacitance cable to get the maximum incredible performance of this pickup.

Works well in any Kinman Goodbye-Soldering Harness.

Some people will call these noiseless Stratocaster pickups but Kinman prefers to describe them correctly as Zero-Hum Stratocaster pickups.  That's because there are 2 types of noise, Hum which is cancelled in the pickup and Buzz which can only be minimized by shielding the wiring cavities (refer to >Technical >Perfect Guitar >Shielding for newer guitars

 

*Stratocaster and Strat are a Trade Marks of Fender Musical Instrument Corp.  Kinman is not connected to Fender.

** Alnico-K is a unique proprietary rod magnet developed by Kinman in 1985.  It has 40% less string pull than Alnico-5 so sustain is longer and there is much less clatter from string crash and no Strat-itis string warble.


Technical & Application info:


 

Under the hood of the Hx-85

 

Hx-85 - specification nomenclature.


US Patents 5,668,520   6,103,986

Covers - included

  • Special Kinman cover with intermediate height extender bushings. 
  • Available in White, Black, Aged White.
  • With and without Kinman logo.
  • Can be tinted with food stains such as Coffee and Tea.
  • Generic covers are not suitable for Kinman Strat pickups.  We sell replacement covers in three colors.

Connection means available

  • Bare wires for soldering.
  • Kinman connectors for plugging into any Kinman Goodbye-Soldering Harness.

Dimensions

Pot & Capacitor values

  • Best with 250k Ohm (measured minimum) volume pot.  Less punch and more bright with 500k.
  • Tone pot is usually the same value as the volume but for a little more top end brightness can be 500k, 1meg or a No-Load.
  • Stock pots can actually measure as low as 175k.  Pots in our Goodbye-Soldering Harness are guaranteed to measure no less that 250k.
  • Normal tone cap value of 0.022uF, 63 ~ 100 volt Polyester.  Smaller uF value lessen the severity of Treble cut, higher values increase it.
  • The voltage rating of Caps is not important but 63 ~ 100 volt have thicker lead wires that result in a neater job.

Magnet spreads we normally ship (ensures magnets align with the strings in each position)

  • Narrow 49.5mm
  • Intermediate 51mm
  • Standard 52.5mm
  • Option to specify your magnet spreads of sets and singles in our 'After-Order Supplementary Questions' email we send you.

Magnet Staggers

  • Normal improved Stagger to suit 7" ~ 14 inch uniform radius fretboards including USA Custom Guitar Compound 7-1/4" ~ 9-1/2
  • Flat Stagger 14" ~ 20" for specific compound radius fretboards (Warmoth 10 ~ 16 inch and Post 2010 Fender Deluxe 9 ~ 14")
  • Option to choose your magnet stagger for sets and singles in our 'After-Payment Supplementary Questions' email we send you.

Hook-up cable

  • 2 conductor shielded is standard.  Cut generously longer than necessary for the 3 stock Strat positions.
  • Middle pickups when supplied with a K9 or TK4 harness have 3 conductor shielded.
  • 3 conductor by request with Order.
  • Custom lengths by request with Order.

Output Polarity: 

  • in-phase with Gibson and Copy humbuckers
  • in-phase with all other Kinman pickups
  • opposite phase to Fender Strat

Mounting hardware included

  • 2 Pan head mounting screws.
  • 2 Silicon Rubber tube springs.

We highly recommend consulting the Install Guide in the Technical section even if you think you know it all.  Kinmans' require specialized knowledge and sometimes there is updated info.  There is also a handy wiring diagram available.

We also highly recommend consulting the Adjust & Set-up page in the Technical section so you get the best out of your Kinman pickups.