Home > Products > Guitar > Jazzmaster




Base Price :

$189 USD

No ORDER Form on this site. Please place your order on the mobile site :





SurfMaster - wound for sound


Covers without Logo are an option when ordering
White, Parchment, Aged White & Black

 

 

Click to watch Video Click to watch Video

Nice demo, click to watch

WOUND for SOUND

SurfMaster:  All the important attributes of original Fender pickups plus this Kinman model has a little more punch and output.  Louder and more dynamic with a greater presence factor than the FatMaster, this pickup has a full bodied sound with a powerful sharp twang and exceptional piano mid-tones and all the highs you crave.  The dynamic range is so excellent you immediately relate it to Dick Dales sound, but you'll get more than that with these SurfMaster pickups because these are versatile and in capable hands can be used for grunge, indie, punk, and just about anything.

You become the Master of your Jazzmaster.

The huge, lush bass end has a nice kick, some refer to as springy or bouncy sound courtesy of the huge dynamic range.

Middle switch position (bridge and neck SurfMasters on together) delivers better than authentic both-on-together sound with intense hollow cluck.

NEWS Dec-22: SurfMaster-DV now available with tapped coil for Dual Voices vintage and modern strong sounds (like the Extra) designed as replacement for Jazzmaster American Pro II bridge pickup but can also be used in the neck position on other models.  3PDT Switch is required for other models.  Zero-Hum in both modes.  

We recommend the Mixed Sets ORDER CHANNEL and you'll get the following options  ....

  • SurfMaster (usually for neck position)
  • SurfMaster Extra (usually for bridge position)
  • SurfMaster-T

The SurfMaster Extra has improved balance with the matching SurfMaster neck pickup (tonally and loudness-wise) which means the neck pickup can be adjusted higher to get all of it's tone and both pickups have the same volume.  Both-on-together sound is absolutely wonderful with an intense hollow cluck, a nice little twang and some nice attack.  With extreme touch sensitivity all 3 positions have an airy lightness and are a joy to play.  There is now no need to do as Brett Kingman did in his YouTube demo (above) and install a SurfMaster in the bridge and a FatMaster in the neck to achieve an agreeable volume balance between the two pickups. 

The 6 rod magnets are Kinman's proprietary Alnico-K** magnets which deliver cleaner sound devoid of string crash and pitch warble.  Supplied with your choice of White, Parchment, Aged White (coming soon) or Black covers.  Original Fender covers are generally not suitable should you want other colors but Cream covers without magnet holes are available on eBay.  Use a brad point drill bit to make the holes to suit the magnet spreads we offer.

US Patents 7,022,909  &  8,791,351
 


Technical & Application info:


Laser engraved identity nomenclature so you'll never forget, and it looks cool too.

Kinman pickups for Jazzmaster are direct replacements and no modification to the guitar is required.  Our standard 52mm spaced covers are interchangeable with USA, Japanese and Korean covers.  Our narrow 50mm version cover is not.  A White, Old Ivory, Parchment or Black cover is included according to your choice.

Some people will call these noiseless Jazzmaster pickups but Kinman prefers to describe them correctly as Zero-Hum Jazzmaster pickups.  That's because there are 2 types of noise, Hum which is cancelled in the pickup and Buzz which can only be minimized by shielding the wiring cavities (refer to >Technical >Perfect Guitar >Shielding for newer guitars

Number of parts in this pickup: 28
Number of parts in regular single coil: 11
Number of parts in other brand noiseless: There are no other singular coil noiseless Jazzmaster pickups with Alnico rod magnets.  Kinman is the only one and that makes it the coolest Jazzmaster pickup available.

 

Pickup adjustment

As with all Kinman Gen-2 pickups these are very sensitive to height adjustment.  A good starting point, so the neck and bridge pickups balance, is with the two E strings fretted at the 15th fret, adjusted as follows ...

  • bridge pickup so the string-to-magnet gap is 1.25mm for both E strings
  • neck pickup so the string-to-magnet gap is 1.5mm for both E strings

Cavity depth

  • 12mm (1/2") standard cavity depth, plenty of height adjustment.

Connection means available

  • Single wires for soldering.
  • also available with Kinman connectors for plugging into a Kinman Strat, Tele or KHP-90 Goodbye-Soldering Harness. 
    • We can make harness for some Jazzmasters upon request.

Hook-up wires

  • 3 single hook-up wires, color coded and facilitates series switching as well as phase reversing. 
  • Cut generously longer than necessary for the 2 stock Jazzmaster positions. neck 37cm & 32cm bridge.
  • Custom lengths by request with Order.

Output Polarity: 

  • in-phase with all other Kinman pickups.
  • in-phase with Gibson and Copy humbuckers.
  • opposite phase to Fender
    • Can be phase reversed to match that of Fender pickups.

Pot & Capacitor values

  • 500k Ohm or original Fender 1 Meg for Volume & Tone is recommended.  250k volume pot compromises the dynamic feel to a small extent.
  • Tone pot is usually the same value as the volume pot.
  • Normal tone cap value of 0.022uF / 63 ~ 100 volt.  Smaller value lessen the severity of Treble cut and requires some experimentation.

Magnet spreads

  • 52mm bridge & 50mm neck for Vintage USA bridges (55.3mm saddle spread)
  •  50mm & 47.5mm for Narrow bridges such as Mastery, Tune-O-Matic etc (52mm saddle spread)
    • Narrow versions incorporate our unique Coil Spread Compensation Technology that restores performance that is lost when magnets are spaced closer together.

Magnet Staggers

  • Normal improved Stagger to suit 7 ~ 14 inch uniform radius fretboards including USA Custom Guitar Compound 7-1/4" ~ 9-1/2
  • Flat Stagger for specific compound radius fretboards (eg Warmoth 10 ~ 16 inch compound and Fender Deluxe Compound Radius)
  • Option to indicate your fretboard radius is in our 'After-Payment Additional Questions' email we send you.

Mounting hardware included

  • We now include our own specially made mounting screws. 
  • 4 Silicon Rubber tube springs are included.

Covers

  • Available in White, Parchment, Ivory* & Black. (*Ivory is similar to Aged White)
  • With and without Kinman logo.
  • Original Fender covers are suitable only for 52mm magnet spread, NOT for our 50mm and 47.5mm neck magnet spreads.
  • Ask for bridge and neck with 52mm magnet spreads if you intend to fit Fender covers, but only for vintage bridges.
  • Aged White and Cream covers without magnet holes are available on eBay.

We highly recommend consulting the Install Guide in Technical section even if you think you know it all.  Kinmans' require specialized knowledge and sometimes there is updated info.

We also highly recommend consulting the Adjust & Set-up page under the Technical Stuff header so you get the best out of your Kinman pickups.

** Alnico-K is a unique proprietary rod magnet developed by Kinman in 1985.  It is Alnico-5 but has 40% less string pull than Alnico-5 so sustain is longer and there is much less clatter from string crash and no Strat-itis string warble.

* Fender and Jazzmaster are registered Trade Marks of Fender Musical Instrument Corp, Inc.  Kinman is not associated with FMIC but they kindly permit us to refer to their Trade Marks to describe our products.